Journal Guide

Mathematical and Computer Modelling provides a medium of exchange for the diverse disciplines utilizing mathematical or computer modelling as either a theoretical or working tool. Equal attention is given to the mechanics, methodology and theory of modelling with an attempt to advocate either mathematical or computer modelling, or a combination of the two, in an integrative form. While the unifying aspect of the journal is its adherence to quantitative models, it seeks diversity by being concerned with a variety of disciplines, including engineering, biological, medical, environmental, social, behavioural and other sciences. Both theoretical and applied works which employ mathematical or computer modelling will be considered for publication. Papers dealing with experiments shall be considered when the results are presented as an integral part of the modelling process.

The analysis and improvement of performance in complex systems, the adaptation of plants to new demands or conditions, and the design of 'optimal' systems are a few of the challenges confronting engineers and systems scientists today. In many cases solutions to problems in areas such as these may be found through the use of appropriate mathematical models. The dynamic case, whether continuous time, discrete time of discrete-event, deterministic or stochastic, presents special challenges, and derivation of an appropriate solution depends strongly on the proper initial formulation of the goals and constraints. Increasingly this demands an interdisciplinary approach to modelling. Models can take the form of sets of equations, graphs or nets, or some combination of elements such as these. The derivation, combination, simplification and validation of models and sub-models are the main topics of Mathematical and Computer Modelling of Dynamical Systems, which provides an international forum for the presentation of new ideas in modelling and for the exchange of experience and knowledge through descriptions of specific applications. Original work will be published as regular papers or short notes dealing with a range of topics including the following:Processes and methods for model formulation, identification, development, reduction and validation etc. (including guidelines and check lists)Automation of modelling and software aid for modellingThe relationship between computational/simulation methods, the underlying mathematical formulation and real-world modelling problemsQualitative modelling including fuzzy and iterative approaches to modellingModular modelling (especially applied to interdisciplinary fields such as mechatronic or controlled environmental systems)Learning networks in modellingUncertainties in modellingThe relationship between the modelling approach and problem solutionsComparisons of methods for modelling, model reduction and model validationeffects of modelling errors on overall performance of engineering system (e.g. relationship between modelling and control design)Applications in the field of engineering systemsApplications in other fields (such as environmental systems, biotechnology etc.) provided the methods or ideas presented are relevant in a number of areas or are of interest from a theoretical point of viewCase studies allowing a comparison of ideas or methods Consequently, computer simulation and description of mathematical methods and/or algorithms are restricted to the field of modelling and to the consequences of modelling. Only the most important facts about the latter should be discussed but not all the details of modelling languages or about mathematical methods and/or algorithms which is used to solve the task for which the (simulation) model was created. Modelling of the task including the modelling of the dynamic system, of restrictions, of goals etc. and the implications of the model used on solution and on solution methods are of primary interest.Therefore, papers dealing with applications are accepted only when the purpose of the model, the assumptions (explicit and implicit) made in its development and the precise process of model validation are discussed carefully. Authors are requested to concentrate an those aspects which are of interest to a large community of engineers and scientists and to organize the paper so that it is stimulating and easily readable for engineers and scientists working in a wide range of application areas. Further, a manuscript should be self-contained without being lengthy i.e. its contents should be able to be understood by readers that are not experts in that specific area of application and without consulting many articles in the literature.INCREASED 2009 5-year Impact Factor: 0.623169; 2010 Thomson Reuters, 2009 Journal Citation Reports174;ReadershipEngineers - especially electrical and control engineers, aerospace engineers, mechanical engineers, marine and offshore engineers, chemical engineers, safe engineers and civil engineers, mathematicians and computer scientists who are involved with applications of mathematical and computer modelling in the physical sciences, in biology, in medicine, in ecology and in other fields such as economics. All published research articles in this journal have undergone rigorous peer review, based on initial editor screening and anonymous refereeing by independent expert referees.DisclaimerTaylor & Francis makes every effort to ensure the accuracy of all the information (the 8220;Content8221;) contained in its publications. However, Taylor & Francis and its agents and licensors make no representations or warranties whatsoever as to the accuracy, completeness or suitability for any purpose of the Content and disclaim all such representations and warranties whether express or implied to the maximum extent permitted by law. Any views expressed in this publication are the views of the authors and are not the views of Taylor & Francis.

The following institutions are supporting MOR in various ways: The Technion, IBM Research Division, Alfred Renyi Institute, Tel Aviv University, Stanford University, Tokyo Institute of Technology, University of Washington.

Ongoing developments in mechanical, aeronautical and civil engineering and major changes brought about by advances in instrumentation and associated computing power necessitate the application and integration of techniques involving systems theory, signal processing, control theory and statistics. Mechanical Systems and Signal Processing (MSSP) provides a forum for the discussion of research covering these disciplines with an emphasis not only on fundamental theoretical advances but also balancing theoretical and experimental demonstration of new methodologies and techniques.MSSP publishes refereed papers of the highest quality reflecting the activities and interests of workers in academic and industrial research and development establishments. Especially sought are papers that include both theoretical and experimental aspects, or that include theoretical material of high relevance to practical applications. Papers showing mainly applications of established approaches will rarely be considered.It is a leader in its field, and the research areas covered include:• Diagnostics of mechanical systems/machines/components• Diagnostics/prognostics/machine learning• Structural dynamics, modal analysis (theoretical and experimental)• Structural health• Sensing/measurements/data acquisition• Signal processing: advances relevant to mechanical systems• System modeling and identification• Uncertainty and robust reliability of mechanical systems• Vibration monitoring and control• Rotor dynamics, rotating machinery• Noise source location and noise cancellation• Dynamic loading and force identification• Inverse problems• Machine and material dynamics, meta materials• Vibro-acoustic modeling, simulation, testing and validation• Automotive research.

This international journal provides a medium of communication between engineers and scientists engaged in research and development within the fields of knowledge embraced by IFToMM, the International Federation for the Promotion of Mechanism and Machine Science.The main topics are: • Design Theory and Methodology; • Haptics and Human-Machine-Interfaces; • Robotics, Mechatronics and Micro-Machines; • Mechanisms, Mechanical Transmissions and Machines; • Kinematics, Dynamics, and Control of Mechanical Systems;• Applications to Bioengineering and Molecular Chemistry.Methodologically, this includes theoretical, experimental, and/or historical approaches, along with their practical application, including education. Substantially, the journal aims at covering all subjects related to mechanisms and machines in general, such as: design theory and methodology, kinematics of mechanisms, rotor dynamics, computational kinematics, multibody dynamics, dynamics of machinery, nonlinear vibrations, linkages and cams, gearing and transmissions, transportation machinery, control and reliability of mechanical systems, including hydraulic and pneumatic systems, experimental test techniques, robots and robotic technologies, mechatronics, micromachines, human-machine interfaces, haptics, among others. Prospective fields of application of mechanism and machine science to other scientific areas such as bioengineering and molecular chemistry are also welcome.For more information on IFToMM, visit their home page on the Internet at www.iftomm.org.

Mechatronics is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and manufacturing processes. It relates to the design of systems, devices and products aimed at achieving an optimal balance between basic mechanical structure and its overall control. The purpose of this journal is to provide rapid publication of topical papers featuring practical developments in mechatronics. It will cover a wide range of application areas including consumer product design, instrumentation, manufacturing methods, computer integration and process and device control, and will attract a readership from across the industrial and academic research spectrum. Particular importance will be attached to aspects of innovation in mechatronics design philosophy which illustrate the benefits obtainable by an a priori integration of functionality with embedded microprocessor control. A major item will be the design of machines, devices and systems possessing a degree of computer based intelligence. The journal seeks to publish research progress in this field with an emphasis on the applied rather than the theoretical. It will also serve the dual role of bringing greater recognition to this important area of engineering.Mechatronics publishes the following types of papers:• Regular Articles should describe original research of high quality in the field of Mechatronics.• Review Articles will generally be specially commissioned, however, suggestions for topics and authors are welcomed by the Editor-in-Chief.•Technical Notes provide rapid publication of important new contributions.Benefits to authorsWe also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our support pages: http://support.elsevier.com

Founded in 1963, Medical & Biological Engineering & Computing (MBEC) continues to serve the biomedical engineering community, covering the entire spectrum of biomedical and clinical engineering. The journal presents exciting and vital experimental and theoretical developments in biomedical science and technology, and reports on advances in computer-based methodologies in these multidisciplinary subjects. The journal also incorporates new and evolving technologies including cellular engineering and molecular imaging. MBEC publishes original research articles as well as reviews and technical notes. Its Rapid Communications category focuses on material of immediate value to the readership, while the Controversies section provides a forum to exchange views on selected issues, stimulating a vigorous and informed debate in this exciting and high profile field.MBEC is an official journal of the International Federation of Medical and Biological Engineering (IFMBE).

Recent advances in wireless technology have led to mobile computing, a new dimension in data communication and processing. Many predict a new emerging, gigantic market with millions of mobile users carrying small, battery-powered terminals equipped with wireless connection, and as a result, the way people use information resources is predicted to be radically transformed.Mobile Information Systems (MIS) presents visionary concepts and stimulating ideas in mobile information systems at both the theory and application levels. The objectives of the journal are to be a source for mobile information systems research and development, and to serve as an outlet for facilitating communication and networking among mobile information systems researchers, practitioners, and professionals across academics, government, industry and students. The journal is published multiple times a year, with the purpose of providing a forum for state-of-the-art development and research, as well as current innovative activities in mobile information systems. The main goal will be to provide timely dissemination of information.

Non-profit Journal: MIC is operated as a non-profit journal and the journal is to a large extent based on voluntary contributions from the editors and reviewers. Any income generated by the journal from author contributions and sponsors are only meant to cover the costs associated with running the journal. From 2009 the MIC articles are available for free download on the Internet, and MIC loses the income source from subscriptions. To compensate for this loss of income, MIC currently requires an author contribution of NOK 1000 per published article. Each author will receive a complimentary issue of the printed edition of MIC where the article appears. The publication fee will be adjusted annually to balance out the costs of running the journal.Review: Each submitted article will initially be reviewed by the editor and/or the editorial secretary. If the article passes the initial review, it will be reviewed in a second step by the closest discipline editor and two internationally recognised experts in the field. All reviews in MIC are anonymous and the journal strives to avoid any conflict of interest in the review process.

Modelling and Simulation in Engineering aims at providing a forum for the discussion of formalisms, methodologies and simulation tools that are intended to support the new, broader interpretation of Engineering. Competitive pressures of Global Economy have had a profound effect on the manufacturing in Europe, Japan and the USA with much of the production being outsourced. In this context the traditional interpretation of engineering profession linked to the actual manufacturing needs to be broadened to include the integration of outsourced components and the consideration of logistic, economical and human factors in the design of engineering products and services.Modelling and Simulation in Engineering intends to report leading-edge scientific contributions from mathematics, computer science, various sub-disciplines of engineering, management, psychology and cross-cultural communication, all of which focus on the modelling and simulation of human-centred engineering systems.Subject areas of Modelling and Simulation in Engineering include (but are not limited to):Mathematical formalisms of system modelling AnalyticalStochasticFuzzyGranularSet-membershipSimulation methodologies and tools Continuous simulationDiscrete and combined simulationStochastic simulationsGame and fuzzy game theoryFinite automataSimulation modellingOptimisation, verification and testingAgent-based simulationKnowledge and culture mining/processing Computation with information described in NLOntologies and knowledge modellingModel morphismsNL discourse analysisComplex systems modelling Qualitative modellingMulti-resolution modelling and simulationModelling abstractionsNumerical methods, algorithms and simulationsComputational Intelligence Neural networksFuzzy logicEvolutionary techniquesSoft computing for human interactionAmbient intelligence and ubiquitous computingSymbolic processingSimulation Visualisation Visualisation algorithmsVirtual and augmented realityVirtual prototypingTools and systems for visualisationFrontiers in HCMS Computational and physical limitationsApplications Interoperability of systems and applicationsCase studies and best practicesSocio-technical simulation (logistics, transportation, etc.).

Serving the multidisciplinary materials community, the journal aims to publish new research work that advances the understanding and prediction of material behaviour at scales from atomistic to macroscopic through modelling and simulation.Subject coverageModelling and/or simulation across materials science that emphasizes fundamental materials issues advancing the understanding and prediction of material behaviour. Interdisciplinary research that tackles challenging and complex materials problems where the governing phenomena may span different scales of materials behaviour, with an emphasis on the development of quantitative approaches to explain and predict experimental observations. Material processing that advances the fundamental materials science and engineering underpinning the connection between processing and properties. Covering all classes of materials, and mechanical, microstructural, electronic, chemical, biological, and optical properties.

Aims and Scope Download Flyer Molecular Informaticsis a peer-reviewed. international forum for publication of high-quality. interdisciplinary research on all molecular aspects of bio/cheminformatics and computer-assisted molecular design.Molecular InformaticssucceededQSAR and Combinatorial Science(2009 Journal Impact Factor: 3.027) in 2010. Molecular Informaticspresents methodological innovations that will lead to a deeper understanding of ligand-receptor interactions. macromolecular complexes. molecular networks. design concepts and processes that demonstrate how ideas and design concepts lead to molecules with a desired structure or function. preferably including experimental validation. The journal"s scope includes but is not limited to the fields of drug discovery and chemical biology. protein and nucleic acid engineering and design. the design of nanomolecular structures. strategies for modeling of macromolecular assemblies. molecular networks and systems. pharmaco- and chemogenomics. computer-assisted screening strategies. as well as novel technologies for the de novo design of biologically active molecules. As a unique featureMolecular Informaticspublishes so-called 'Methods Corner' review-type articles which feature important technological concepts and advances within the scope of the journal. ISSN: 1868-1743 (print). 1868-1751 (online). Volume 30. 12 Issues in 2011. Masthead Masthead(PDF) –[Show history][Hide history] How to cite:To make sure that references to this journal are correctly recorded and resolved (for example in CrossRef or ISI Web of Science). please use the following abbreviated title in any citations: 'Mol. Inf.' (punctuation may vary according to the style of the citing journal).

Multibody System Dynamics provides a unique single vehicle for reporting significant developments in all areas of multibody system dynamics. The journal explores theoretical and computational methods in rigid and flexible multibody systems, their applications, and experimental procedures used to validate the theoretical foundations. The journal’s research papers address the issues of new formulations, solution algorithms, computational efficiency, analytical and computational kinematics, synthesis, flexibility effects, control, optimization, real-time simulation, parallel computations, workspace and path planning, reliability, and durability. Fields such as vehicle dynamics, aerospace technology, robotics and mechatronics, machine dynamics, crashworthiness, biomechanics, computer graphics, and system identification are also examined when the topic is relevant to multibody system dynamics.

Multidimensional Systems and Signal Processing publishes research and selective surveys papers ranging from the fundamentals to important new findings. The journal responds to and provides a solution to the widely scattered nature of publications in this area, offering unity of theme, reduced duplication of effort, and greatly enhanced communication among researchers and practitioners in the field.A partial list of topics addressed in the journal includes multidimensional control systems design and implementation;  multidimensional stability and realization theory; prediction and filtering of multidimensional processes; Spatial-temporal signal processing; multidimensional filters and filter-banks; array signal processing; and applications of multidimensional systems and signal processing to areas such as healthcare and 3-D imaging techniques.

Centered around multiscale phenomena, Multiscale Modeling and Simulation (MMS) is an interdisciplinary journal focusing on the fundamental modeling and computational principles underlying various multiscale methods. By its nature, multiscale modeling is highly interdisciplinary, with developments occurring independently across fields. A broad range of scientific and engineering problems involve multiple scales. Traditional monoscale approaches have proven to be inadequate, even with the largest supercomputers, because of the range of scales and the prohibitively large number of variables involved. Thus, there is a growing need to develop systematic modeling and simulation approaches for multiscale problems. MMS will provide a single broad, authoritative source for results in this area. MMS bridges the growing gap in communication between mathematics, chemistry, physics, engineering, computer science, environmental science, and more.